CatswitchPro
Switch up to 16 remote devices to 16 remote displays located up to 1,500 feet away.*| Related Products |
|---|
 |
|
XTP-RX |
|
Use a single cat5 cable to receive high resolution SXGA, and stereo audio up to 1000ft away from a transmitter. |
| More Info |
 |
| XTA-RX |
|
Use a single cat5 cable to receive high resolution SXGA and stereo audio up to 1000ft away from a transmitter. |
| More Info |
 |
| HDP-RX |
|
Component video, audio, RS232, IR CAT5 receiver. |
| More Info |
 |
|
RMT-2 |
|
The RMT-2 infrared remote control makes it possible to control virtually any SmartAVI, Inc. matrix switch from as far as 30 feet away! The RMT-2 has 18 buttons for complete control of your matrix, including buttons for RGB skew correction. |
| More Info |
 |
|
SM-EYE |
|
External infrared receiver; IR range of 10' to 30'. |
| More Info |
 |
| SM-LED |
|
IR emitter 6ft single LED. |
| More Info |
 |
| SMTCP-2 |
|
Our SMTCP Device allows you to control our entire line of video matrix products over the Internet from anywhere in the world |
| More Info |
Specifications
Video Data Bandwidth 250MHz Input signal level 1Volt pk-pk into 75R Output impedance 100 Ohms Input Impedance 75R Ohms Connector RJ45 Format VGA/SVGA/XGA/RGB Audio Bandwidth 20KHz Signal level 0dB Output Impedance 100 Ohms Input Impedance 10K Ohms Input Connector VIA RJ45 Syncs Bandwidth Digital Signal level 5V Output Impedance 100 Ohms Input Impedance 10K Ohms Input Connector HD15 socket Cat5 Signals Pair 1 Red video balanced 1 V pk-pk + audio left Pair 2 Green video balanced 1 V pk-pk + audio right
Pair 3Blue video balanced 1 V pk-pk + sync Pair 4 Data RS232 and IR Control IR Remote Unit RS232 Software Power Voltage 90-230V Connector IEC Fuse rating 1A A/S Frequency 50/60 Hz Mechanical Height 5.23 in. (133 mm.) Width 19 in. (483 mm.) Depth 18 in. (450 mm.) Weight 22 lbs. (10 kg.) Rack Units 1U